No Products in the Cart
Blickman Windsor Scrub Sinks include an 8" deep bowl and 22" scrub area with gooseneck faucet splash mounted to the back sink panel. All welded, seamless construction and coved corners means easy cleaning; no crevices for dirt to collect. Choose knee-action or infrared sensor controls; knee-action will be provided unless otherwise specified. Available in single, double, triple, or four-place sink units. Optional foot, elbow, or infra-red operated controls are available.
Blickman 9800 Series Lodi Scrub Sinks are built with seamless construction with 1" (2.54) coved corners. Bowls are 9-1/4" (23.495) deep at rim and 18-1/2" (46.99) from spout to drain allowing for a deep scrub area. The spout is positioned toward the rear of the sink to divert water splash away from the operator. Undersides of the bowl are sound deadened and enclosed by double walled end panels. Each sink is equipped with a stainless steel base housing an infrared sensor.. Base extends 21" (53.34) from the basin and hangs 14-1/2"(36.83) from finished floor. May require optional chair carrier. Refer to installation manual. Sinks provide scrub areas approximately 30" (76.20) wide x 21-1/2 (54.61) deep, each with its own swivel gooseneck splash mounted faucet; adjustable thermostatic mixing valve, check stop strainer, static sensing probe, flow control valve, 1-1/2" (3.81) stainless steel waste outlet and tailpiece.
Welding: All welding is accomplished by heli-arc method. All exposed welds ground smooth.
Finish: All exposed stainless steel surfaces are free from pit marks, weld seams and scale, and polished to a No. 4 satin finish.
